High-pressure quick water pipe joints are quickly connected in faucets, water spray guns and water pipes. This method is labor-saving and particularly convenient to use. The quick connection method of the high pressure water pipe joint is as follows: First, we should install the quick joint on both ends of the water pipe, and at this time, we need to gently tighten the nut next to it. The next step is to connect the faucet connector or use the water spray gun connector. If you hear a "click" during this process, it means that the quick connector of the high-pressure water pipe that needs to be connected has been completed. Closed water pipe joint method: When the mold joint and mold nozzle in the high-pressure water pipe quick joint are closed, in the case of no connection, the female head and the male head stand against the pipe channel under the force of their respective thimbles and springs, and the male head The thimbles and the female headers are closed respectively, which can instantly block the fluid flow. When in the connected state, when the male head is inserted into the female head, the thimble returns to its original position under the action of the spring, and the steel ball rolls and locks to make the male head tightly connected, and at the same time, the thimbles of the female head and the male head push each other to open , make the fluid flow, and the O-ring in the high-pressure water pipe quick connector can completely block the fluid leakage. Open, when the mold joint and mold nozzle in the high-pressure water pipe quick connector are in the open state, when the copper jacket on the female head is pushed to the other end without being connected, the steel ball will automatically roll outwards, so that the male The head is removed, in which case the fluid flows outwards since neither the male nor the female has a valve. In the connection state, the male head is inserted into the female head, and the copper jacket is pushed to the previous position by its spring force, so that the steel ball is locked, and the fluid flows, and the O-ring in it will prevent the fluid from flowing out.
