The water pipe joint is a secondary splicing, generally used as a corner, if it is not handled properly, it will easily lead to water leakage. If it is an open pipe leak, it is relatively easy to deal with, if it is a hidden pipe leak, it will cause a great impact. Re-splicing: The cause of water leakage is generally due to the joints being too large, or the joints of poor quality. It is recommended to buy some good quality joints and then re-splicing. The hot melter can be used directly and then spliced. It should be noted that the water needs to be cleaned up before processing, and then splicing. Wrap with water pipe tape: The function of water pipe tape is to increase the contact area and prevent water leakage. First you need to wrap the tape around the water pipe, and then re-splicing the water pipe. It should be noted that the number of turns of the tape winding needs to be tighter, which can increase the contact area. When buying water pipes, you need to buy better quality water pipes, and try to avoid using some inferior water pipes.
