In the selection of pipeline heat medium, which is what we call water, it is best to use pure water if possible. Because there are no minerals such as calcium and magnesium ions in the pure water, there will be no scaling or clogging of pipes. In addition, no fungi will be produced. If there are fungi in the water, some sticky things will grow in the pipes for a long time, which will affect the flow rate of the water. If it is not possible to use pure water, it is recommended to add silicon phosphorus crystals when the system is first filled with water after the pipeline is flushed. When water is injected, let the water flow through the silicon-phosphorus crystal tank, which can also play the role of descaling, preventing pipeline scaling and sterilization, and can keep the pipeline durable, and the effect will not be greatly reduced with the passage of time. In many areas in the north, everyone uses ordinary tap water when replenishing water. The water quality is relatively hard, and there are many minerals in it. After a long time in the pipeline, it is easy to scale and form water and alkali, and there will be a lot of messy things in the pipeline. It is precisely because of this that a new industry has emerged, which is specialized in floor heating pipe cleaning. In addition, after the floor heating project is completed, there will be a lot of sealing materials such as hemp and PTFE raw material tape in the main pipeline. These materials will fall off during use, for example, when screwing threaded connectors. in the pipeline. An experienced dealer will install a Y-strainer on the underfloor heating manifold. When the floor heating project is completed, the pipeline should be flushed with high pressure, all these debris can be flushed out, and a lot of things can be flushed out. It is recommended to clean the filter once after flushing. This can ensure that there is no blockage in the main pipe and will not affect the heating effect.
