Precautions for the use of floor heating pipes: When using it for the first time, be sure to adjust the water temperature. The normal water temperature is between 25 and 30 degrees. If the temperature is too high, the good use of the floor heating pipeline cannot be guaranteed, and it is easy to deform and break. The temperature of the connected water needs to be continuously increased, but it will only rise by 5 to 10 degrees each time, and it can only rise after a week of operation. Generally, when the water temperature reaches 60 to 65 degrees, it can be used normally. You also need to check for water leaks. Generally, floor heating will be inspected and accepted after installation, and it can only be put into use after passing the test. However, it is easy to be damaged during later decoration, which will affect its normal operation. Therefore, before first use, all fittings in the pipeline must be tested to ensure that there are no leaks or drips. Set the temperature. If there is no one at home, there is no need to turn off the floor heating, otherwise it will take a long time to warm up to the corresponding temperature when it is turned on again, resulting in a waste of energy. Moreover, the temperature in winter is very low. If the internal temperature of the pipe is too low, there will be problems of freezing and cracking. Therefore, it is necessary to ensure that the indoor temperature is 13 to 15 degrees, so that the temperature can rise quickly.
