If the pipes are not installed properly during the decoration, it is easy to cause problems such as pipe blockage, leakage, water accumulation, and poor drainage. Do the following points to prevent the pipeline from being blocked: the pipes and water appliances must be cleaned of impurities and dirt in the pipe before installation; prevent the sealing material at the mouth of the pipe from falling into the pipeline, so as not to block the pipeline and water appliances; Temporary interruptions must be blocked in time to prevent debris and dirt from falling into the pipeline and causing blockage; after pipeline construction, the pipeline system must be flushed until it is qualified. Install the water supply pipeline in this way to prevent leakage: the pipeline threads should be operated according to the specifications when threading, and the pipelines with problems such as broken wires and missing wires are not allowed to be used for installation; the pipelines used for residential decoration must use qualified pipes and For pipe fitting products, it is still necessary to carefully check whether the pipes and fittings are defective during installation, so as to avoid rework and repair; after the installation of the pipeline is completed, a hydraulic test must be carried out, and each joint must be carefully checked to ensure that there is no leakage before it is allowed to be put into use or entered. in the next process.
