PPR Pipe Installation Tool：
Including heat fusion tools and cutting tools, such as pressure regulators, electrofusion, heating devices, cutting machines, and also complete sets of integrated tools. Heating power selection of thermal welding tools: usually 700~800W for pipes with an outer diameter of 63mm; 1200~1500W for pipes with an outer diameter of 275mm.
Connection Method Of PPR Pipe:
PPR pipes are generally connected by hot melting, because this connection method is more stable and less likely to break. 1. Prepare a ppr pipe joint. 2. Use a hot-melt machine to heat the elbow and the aluminum-plastic pipe and connect them. During operation, heat the pipe and joint to a level close to melting, and quickly insert the two pipes. 3. Pay attention when connecting, the joint must be consistent with the caliber of the aluminum-plastic pipe, so that the connection will be stronger.
PPR Pipe Hot Melt Skills:
Pay attention to the dryness and cleanliness of pipes and components during operation; pay attention to power on the equipment before operation to make it reach a suitable temperature, and then operate when the green light is on. When cutting pipes, pay attention to one side perpendicular to the pipeline. When the product When a certain heating time is reached, take it out of the mold at 7 speed and insert it to the expected depth at a vertical angle, remember not to rotate.
