When the globe valve is used, it will also be selected according to the region. For example, in the high-voltage system of a thermal power plant or a nuclear power plant, a balance or plunger type globe valve must be selected, and a small globe valve should also be selected for this. If the adjustment accuracy is not very high, the diameter of the pipeline is small, you can choose the adjusted section stop valve. On the contrary, if it is synthetic production, you can choose a high-pressure stop valve of 32MPa. During the operation of the globe valve, it is still necessary to ensure that the valve parts are complete, especially the flange and bracket bolts. It must be intact, and there should be no looseness. For example, if the nut on the handwheel is loose, it must be tightened immediately, and when the handwheel is lost, it must be lined up in time. And its stuffing cover can't have skew problems, or it is not easy to be polluted by rain, snow and dust.
