The water distributor is installed in the wall and special box, generally installed in the kitchen; the valve below the water collector is more than 30 cm away from the floor, and it is installed horizontally; the water supply valve is installed in front of the water distributor, and the return valve is installed behind the water collector ; The filter is installed in front of the water distributor; the connection sequence of the distributor: connected to the water supply main pipe - lock valve - filter - ball valve - three-way - water separator - geothermal pipe - water collector - ball valve - connected to the return water mains. Can a radiator be added to the floor heating water divider? The floor heating water separator can heat the radiator, but it is not recommended to do so. The function of the water separator is to separate the hot water from the heat source into the pipes laid by the ground radiant heating of each road, so as to achieve the purpose of room heating and temperature adjustment. The operation of floor heating requires circulating water with low temperature and large flow, and the radiator is circulating water with high temperature and small flow, causing the radiator and floor heating to grab water, which will affect the temperature of floor heating. If you have to connect it, you can connect all the way to the radiator at the return water ppr pipe of the sub-catchment, so that the temperature of the floor heating will not be affected.
