Here's how to fix leaking water pipes in walls. The solution to the leakage of water pipe joints in the wall: the leakage of water pipe joints at home can only be replaced with a new joint, and the water leakage at the wire mouth can be removed. If there is no rubber pad, a rubber pad should be installed. , apply thick white paint at the mouth of the silk and then wrap it with hemp silk before installing it. If it is glued or welded, it is more difficult to solve it by yourself. If it is a problem with the faucet, it is caused by the wear of the shaft gasket in the faucet. Use pliers to loosen and remove the gland bolt, take out the shaft washer with a clip, and replace it with a new shaft washer. The solution to the leakage of the sewer pipe in the wall: if the PVC water pipe leaks, you can buy a water pipe to connect it, first cut the replaced pipe, and then use the newly purchased pipe to connect the cut off pipe, and apply PVC glue to it. The inside of the two ends of the continuation and the outside of the two downpipes. The solution to the leakage of the iron water pipe in the wall: if the iron pipe leaks but is not rusted, and only some parts are damaged, close the main valve of the water pipe and replace the iron water pipe in that position. Cut off the water pipe at this position, use the instrument used to cut through the thread, and then connect the connector. If the leakage of the iron water pipe is caused by the overall corrosion, you need to close the main valve, replace the whole section of the water pipe, and screw the turnbuckles on both ends.
