The following is the installation method of Basin Faucet. The first is the installation of the single-hole Basin Faucet: When purchasing a single-handle basin faucet, you should pay attention to the diameter of the outlet and the height of the upper nozzle, which is most suitable for 35 cm from the basin. Before installation, flush the water pipes buried in the wall in advance. When installing the Basin Faucet, a special angle valve must be selected, and the angle valve must be fixed with the hot and cold water pipes from the wall. When it is found that there is a distance between the angle valve and the water pipe on the faucet, it is necessary to purchase a special extension pipe to connect. If the water inlet pipe is too long to exceed the water outlet pipe, you can cut off the part according to your needs. If the angle is not suitable, you can bend it to the required position according to your needs, but don’t bend it hard to 90 degrees or more than 90 degrees. When installing the basin to drain water, please don't forget to buy the small interface of the faucet (the faucet is shorted).
