There are some mistakes that are most likely to be made in the process of home decoration plumbing construction, and many details need to be paid attention to. If the waterway goes to the sky, the ceiling must be bottomed with wooden pegs and then fixed on the wooden square. It is best not to use bridge bends where the hot and cold water crosses on the top, or it may have some impact on the water flow. In the process of home decoration, the water pipes should minimize the joints of the waterway, so that the probability of water leakage is much smaller. All the water channels come down from the top and enter the wall. The water pipes on the top are fixed with elevators. The distance between the elevators should not be greater than 80 cm. If the distance between the elevators is too long, the vibration of the water flow will cause the water pipes to rise from the top over time. fall off. The hot water is kept at a proper distance to avoid heat transfer, and the hot water comes slowly. The distance between the elevators on the road should not be too long, and the minimum standard is that the elevators must be fixed within 80 cm. The longer the pipeline distance, the higher the requirements for the distance of the elevator. After the entire waterway goes down from the sky, it falls directly into the wall, thus avoiding the hidden problems of water pipes on the ground.
