If the soap dispenser has been idle for a period of time, some soap may condense in the soap dispenser. If the amount of soap is small, stir it with warm water. This will restore the soap to liquid. If the above method is not feasible, remove the condensed soap Remove, then add warm water, and use the soap dispenser several times until the warm water drains from the soap dispenser, thus cleaning the entire soap dispenser. It should be noted that the dust and impurities in the soap liquid will block the liquid outlet. If you notice that the soap liquid in the inner bottle has deteriorated, please replace the soap liquid; if the soap liquid is too thick, the soap dispenser may not produce liquid. In order to dilute the soap The liquid can be mixed with a little water and then used. When using it for the first time, first add water to discharge the vacuum inside. After adding soap liquid, there may be some water in the inner bottle and pump head when using the product for the first time. This is not a quality problem of the product but the product leaves the factory left over from previous testing.
