The solution to the leakage of PVC water pipe joints: If there is water leakage in the PVC water pipe joints at home, you must clearly know the cause of the water leakage before processing. If it is a slight water leakage, in most cases it is the connection between the water pipe and the PVC water pipe joint. If it is not handled well, the leakage of PVC water pipe joints is relatively serious, most of which are caused by the hardening of the water pipe or the long-term use of foreign objects to block the water pipe. In the actual solution, it should be dealt with according to the specific situation. If the PVC water pipe joint itself has been replaced, the easiest way is to replace it directly. If there is water leakage at the wire mouth of the PVC water pipe joint, it can be removed. If the rubber pad is not installed, it needs to be installed. , apply a thick white paint to the wire mouth and wrap it with hemp wire, and install it. The same is true for wrapping with raw material tape. If there is water leakage at the glued or welded joint, it is difficult to solve it by yourself due to the lack of tools, and you can find a professional to deal with it. If it is a plastic water pipe, the water leakage treatment method is as follows: first, use a small hacksaw to saw off the leaking area, but the saw edge must be flat, and then use sandpaper to polish the leaking port and wipe it with a cloth. Next, you can apply glue to the port. After a few minutes, you can apply glue to the "bamboo" joint of the water pipe, rotate it repeatedly until it is firm, and finally use the same method to connect the other end, and then connect Smear the right amount of glue on the seam and you're done. When there is water leakage in the PVC water pipe joint, if there is no emergency treatment, there will definitely be a situation of flooding.
