The solution to the leakage of PVC water pipe joints: If there is water leakage in the PVC water pipe joints at home, be sure to know the cause of the water leakage before proceeding with the treatment. Well, the leakage of PVC water pipe joints is relatively serious, most of which are caused by the hardening of the water pipe or the long-term use of foreign objects to block the water pipe. If the PVC water pipe joint itself is broken, the easiest way is to replace it directly. If the PVC water pipe joint is leaking water, it can be removed. If the rubber pad is not installed, it needs to be installed. If the rubber pad is aging, replace the rubber pad. , apply a thick white paint to the wire mouth and wrap it with hemp wire, and install it. The same is true for wrapping with raw material tape. If there is water leakage at the glued or welded joint, it is difficult to solve it by yourself due to the lack of tools, and you can find a professional to deal with it. If it is a plastic water pipe leaking, the treatment method is: first use a small hacksaw to saw off the leaking area, but the saw must be flat, then use sandpaper to polish the leaking port and wipe it with a cloth; then you can use glue Apply it on the port, after a few minutes, you can apply glue to the "bamboo" joint of the water pipe, rotate it repeatedly until it is firm, and finally use the same method to connect the other end, and then apply an appropriate amount to the joint. Glue and you're done.
