The angle valve is an angle stop valve. The angle valve is similar to the ball valve, and its structure and characteristics are modified from the ball valve. The difference with the ball valve is that the outlet of the angle valve is at a right angle of 90 degrees to the inlet. Angle valves are also called triangle valves, angle valves, and angled water valves. This is because the pipe has a 90-degree corner shape at the angle valve, so it is called an angle valve, angle valve, or angled water valve.
Application：
1. Civilian use
The angle valve has four main functions:
①Transfer the internal and external water outlets;
②If the water pressure is too high, it can be adjusted on the triangle valve and turn it down a bit;
③The function of the switch, if the faucet leaks, you can turn off the triangle valve instead of the main valve at home;
④ Beautiful and generous. Therefore, the general new house decoration is an indispensable plumbing accessories, so the designer will also mention it when decorating the new house.
2. Industrial use
The valve body of the angle valve has three ports: water inlet, water volume control port, and water outlet, so it is called triangle valve.
Of course, the angle valve is constantly improving. Although there are still three ports, there are also angle valves that are not angled.
The angle valve referred to by the industry: the angle control valve is similar to the straight-through single-seat control valve except that the valve body is a right angle.
Features
1. The flow path is simple, the dead zone and the vortex zone are small. With the help of the scouring effect of the medium itself, it can effectively prevent the medium from clogging, that is, it has better self-cleaning performance;
2. The flow resistance is small, and the flow coefficient is larger than that of a single-seat valve, which is equivalent to that of a double-seat valve;
It is suitable for occasions with high viscosity, suspended solids and granular fluids, or where right-angle piping is required. The flow direction is generally bottom in and side out. Under special circumstances, it can be reversed, that is, it flows in from side to side and out from the bottom.
The triangle valve has two types of hot and cold (identified by blue and red signs). Most manufacturers have the same material. The hot and cold signs are mainly used to distinguish which is hot water and which is cold water.
