Water pipe installation process: The installation of indoor water pipes must be carried out in strict accordance with the prescribed steps. First of all, before installing the water pipe, the owner must have a general plan in mind, and at the same time, he must communicate with the water and electricity installation master a lot. If it is the kind with drawings, the installation of the water pipe is relatively simple. That's it; then fix the clip on the wall with an electric hammer, connect the pipes with a special hot melt machine, and then use a pressure test pump to test the entire water line. After installing the water pipes, don’t forget to clean up the construction site; let’s talk about the layout of the water pipes. In general, the vertical pipes and the horizontal pipes should be installed separately. It is recommended that you do not cross-install the vertical pipes and the horizontal pipes. In case of cross-installation, the installation position of cold and hot water pipes needs to maintain a certain distance, and pay more attention to the height and direction of the drainage pipes, so that the waste water can flow to the floor drain normally and then be discharged.
