Which Pipe Fittings Are Commonly Used In Water Pipe Installation And Renovation?

Jul 13, 2022

Leave a message

         When laying PPR water pipes, it is natural to use corresponding accessories for connection to ensure the directionality of waterway reconstruction and the corresponding number of water outlets. However, if the accessories are improperly selected or there are problems in the installation, it is easy to cause problems such as water leakage, which seriously affects the quality of the water pipes. Our common plumbing accessories are: Socket, Elbow, Tee, Stop Valve, Short Bridge Tube, etc. Next, IFAN will take you to know the most important accessories.


Socket

          When the length of the water pipe is not enough and needs to be extended, it is usually used directly. The key to choosing is whether it matches the size of the water pipe.

Socket

Elbow

          As the name suggests, the connection needs to be bent. Usually 90°. In some special positions, 45° Elbow will be used according to the actual situation. There are also forms such as double Elbow, which are suitable for more occasions.

Elbow

Tee

       Increase the water outlet of the water supply pipe for "drainage". In addition, there are accessories such as Cross Tee, which can be selected according to the specific situation.

       It should be noted that accessories such as Socket, Elbow, and Tee are also divided into three specifications: Equal, Male Thread, and Female Thread. Male Female Thread is used to connect faucets, angle valves, or other types of water pipes. In home decoration, the vast majority of the use of inner wire accessories.


Tee


Stop Valve

         It is used to open and close the water flow. During installation and use, pay attention to the protection of the valve core.

Stop Valve

Short Bridge Tube

         Staggers two intersecting water pipes or circuits up and down.

Short Bridge Tube

        In addition, there are various accessories to meet the different needs of users. IFAN reminds that when connecting, the hot-melt temperature is required to reach 260 °C. After the surface of the pipe and pipe fittings are cleaned, they can be heated on the PPR Welding Machine for an appropriate time before plugging. The hot melt connection has low cost, simple operation, safety and reliability, and can effectively prevent leakage at the connection. If you want to contact to buy IFAN products or learn more information, you can follow us. IFAN, escort your home life.


Send Inquiry