The radiator water separator is mainly used to connect the water collecting device of the radiator pipeline, and is an indispensable equipment for radiator heating. If the water divider stops working, then the radiator will not be able to operate. In some respects, the water divider determines the service life of the radiator, so the installation of the radiator water divider should be careful. The water distributor is used in the water system to connect the distribution and water collection installation of the supply and return water of various heating pipes. According to the incoming and outgoing water, it is divided into a water separator and a water collector. Therefore, it is called a sub-water collector or a water collector, commonly known as a water separator. The material of the water divider used on the top of the floor heating and radiator system should be copper or brass, and the water divider used for the renovation of the household meter of the tap water supply system is mostly PP or PE material. Both supply and return water are equipped with exhaust valves, and many water distributors also have drain valves for supply and return water. The front end of the water supply should be provided with a "Y" filter. Each branch of the water supply and water distribution pipe shall be equipped with valves to adjust the amount of water.
Installation requirements for the radiator water separator: the water separator is installed on the wall and in the special box, generally installed in the kitchen; the valve below the water collector is more than 30 cm away from the floor, and it is installed horizontally; the water supply valve is installed in front of the water separator and returns to the The water valve is installed behind the water collector; the filter is installed in front of the water distributor; the connection sequence of the distributor: connected to the water supply main pipe-lock valve-filter-ball valve-tee-water separator-geothermal pipe-collector Water device - ball valve - connected to the return water main. Can a radiator be added to the floor heating water divider? The floor heating water separator can heat the radiator, but it is not recommended to do so. The function of the water separator is to separate the hot water from the heat source into the pipes laid by the ground radiant heating of each road, so as to achieve the purpose of room heating and temperature adjustment. The operation of floor heating requires circulating water with low temperature and large flow, and the radiator is circulating water with high temperature and small flow, causing the radiator and floor heating to grab water, which will affect the temperature of floor heating. If you have to connect it, you can connect all the way to the radiator at the return water ppr pipe of the sub-catchment, so that the temperature of the floor heating will not be affected.
