The reason for the leakage of PVC water pipe joints:
If the toilet sewer pipe uses a PVC water pipe, you can buy a PVC water pipe to connect it yourself when there is water leakage. In addition, you can also buy waterproof tape to repair the sewer pipe, just wrap it around, and then smear it with mortar waterproofing agent and cement. The main reasons for the leakage of PVC water pipe joints include uneven glue, or the surface of which is not wiped clean, or water is passed through shortly after sticking, because the glue cures slowly in winter, which will lead to water leakage. If the curing is not good, you can re-touch some glue after unplugging, or touch some glue at the mouth to see if it can be blocked. The leakage of the water pipe joint of the washing machine is generally related to the installation of the water inlet pipe of the washing machine. If some small details are not paid attention to when installing the water inlet pipe of the washing machine, the phenomenon of water leakage of the water inlet pipe of the washing machine will occur in the future use, which is also one of the reasons.
The solution to the leakage of PVC water pipe joints:
If there is water leakage in the PVC water pipe joints at home, you must clearly know the cause of the water leakage before processing. If it is a slight water leakage, in most cases it is the connection between the water pipe and the PVC water pipe joint. If it is not in good condition, the leakage of PVC water pipe joints is more serious, most of which are caused by the hardening of the water pipe or the long-term use of foreign objects to block the water pipe. In the actual decision, it should be dealt with on a case-by-case basis. If the PVC water pipe joint itself has been replaced, the easiest way is to replace it directly. If there is water leakage at the wire mouth of the PVC water pipe joint, it can be removed. If the rubber pad is not installed, it needs to be installed. , apply a thick white paint to the wire mouth and wrap it with hemp wire, and install it. The same is true for wrapping with raw material tape. If it is leaking at the glued or welded joint, it is more difficult to solve it by yourself due to the lack of tools. You can find a professional master to deal with it. The treatment method for leaking plastic water pipes is: first, use a small hacksaw to saw off the leaking area, but the saw must be flat, and then use sandpaper to polish the leaked port and wipe it with a cloth. Next, you can apply glue to the port. After a few minutes, you can apply glue to the "bamboo" joint of the water pipe, rotate it repeatedly until it is firm, and finally use the same method to connect the other end, and then connect Smear the right amount of glue on the seam and you're done.
IFAN VR Factory (Click Here For A 360° Tour Of IFAN Factory/Workshop)
Need product recommendations?
Contact IFAN Supplier
Phone:+86 15088288323
Email:Sales24-Ifan@Ifangroup.Com
